Product Profile of Digital Temperature Controller/ Indicator
Digital Temperature Controller/ Indicator is designed to show current temperature reading, minimum temperature setting and maximum temperature setting. The Temperature Controller/ Indicator can be set to the operation of relay. The Temperature Controller/ Indicator also provides LED indication for power on/off and relay on/off. The Digital Temperature Controller/ Indicator is equipped with a display of 3.5 digits [0.1 display resolution].
Neutronics Manufacturing Company is manufacturing Digital Temperature Controller/ Indicator. Neutronics Manufacturing Company supplies a wide range of instruments in the field of Electrical and Electronic Engineering for use in Industrial controls and Measurement systems and Laboratories. The range of products includes automatic power factor control relay, digital tap position indicator, automatic voltage regulating relay, digital set point relay, digital panel meter, high voltage oil test set, AC/DC high voltage test set, digital temperature control, relay test set, auto re-closing relay and remote position indicator.
Key Features of Digital Temperature Controller/ Indicator
- Display: 3.5 digits (0.1 display resolution)
- LED display: Current temperature reading, Minimum temperature setting and Maximum temperature setting
- Minimum and maximum thermometer
- Can be set to the operation of relay
- LED indication for power on/off and relay on/off
Product Specification of Digital Temperature Controller/ Indicator
- Accuracy:+- 0.5% of F.S.
- Analog Outputs:One analog o/p 4-20mA, 1k burden, one analog o/p 4-20mA, (Optional)
- Display:3.5 digits (0.1 display resolution)
- Indications:RED LED to indicate Power On, Yellow LED Auto Manual, Green LED Alarm (relay), Green LED for very high (Relay), Green LED for Fan (Relay), Blue LED for sensor Fault
- Insulation:Insulation resistance > 100 M at 500 V DC between each Terminal proof between all mains supply terminals shorted together & earth - no break down for one minute. - Factory tested at 1.5 kV rms, 50 Hz. - Susequent field test at 0.5 rms, 50 Hz
- Output:Two N/O Contacts (5A at 240V AC or 10A at 110V AC
- Overall Size:96 X 96 X 150
- Resolution:1°C or 1°C Opt.
- Scan Time:Seven segment,12.5 mm RED LED, 1 digit display for channel no , 4 digit display for temperature
- Sensor Inputs:6 Nos. or 8 Nos. Max
- Set Points:2 Nos. + 2 Nos. optional
- Supply Voltage:90 V to 260 V AC/DC Voltage
- Temperature Sensor:RTD (Pt 100 DIN 43760)
- Terminals:Screw Caged suitable for 0.2 - 4 sq.mm. solid conductors
