Product Profile of Gantry /goliath Cranes
ElectroMech offers Double Gantry/Goliath Cranes. ElectroMech specializes in engineering, manufacturing, and servicing of wire rope hoists, EOT and Goliath cranes, and customized material handling solutions. Goliath / Gantry Cranes are self propelled cranes running on rails installed at ground level and are mainly used at
- Workshops where existing columns cannot bear the wheel loads of a bridge crane
- Workshops with low roof tie height that might restrict the height of lift of a regular bridge crane
- Locations where bay lengths are excessive
- Locations where bay lengths do not remain constant
- Sites / projects where crane itself needs to be relocated from one place to another
- Locations where loads are to be shifted from points outside the crane span as in the case of an overhang on either side of the rails
Technical specifications of the Gantry /Goliath Cranes are as follows:
- Safe Working Load-1000 kg to more than 200,000 kg
- Spans- 6m to more than 50 m Open Cabin / Totally Enclosed Cabin [optional
- Class of Duty / Standards-M5, M7, M8 as per IS 3177 / IS 807. Also available as per FEM, DIN, BS or any other applicable international standards.
- Crane Control- From floor through Pendant Push Buttons, Open Cabin / Totally Enclosed Cabin [optional], Radio Control [optional].
- Power Supply System - To Hoist and Cross Travel through Trailing Cables or through Drag Chains To Crane through Shrouded Bus Bars / Trailing Cable / MS Angle Iron Conductors / Bare Copper Conductors.
- Drive System -Single / Twin Drive with Squirrel Cage / Slip Ring Induction Motors, through totally enclosed, oil immersed, and helical gearbox. Motors Crane Duty motors for Main Hoisting, Auxiliary Hoisting, Cross Travel and Long Travel.
- Brakes - Electro Hydraulic Thrusters / Disc brakes for all motions
