Product Profile of Automatic Strip Analyser with Built in Stabiliser
Robonik India Pvt Ltd manufactures Automatic Strip Analyser with Built in Stabiliser. Robonik India Pvt Ltd is an ISO 9001:2000 and ISO 13485: 2007 accredited company. The Company manufactures various types of diagnostic instruments. The Automatic Strip Analyser with Built in Stabiliser, under the brand name `Elisa`, is a standalone system for all routine immunoassays, Biochemical, hormones and drug level test. The Automatic Strip Analyser with Built in Stabiliser has extensive programming modes like Absorbance, Single Standard, Multi Standard, Cut off and % Absorbance. The Automatic Strip Analyser with Built in Stabiliser has built in 20 column thermal printer with 384 stationary heads. This Analyser has extensive curve plotting and unique circuitry.
Key Features of Automatic Strip Analyser with Built in Stabiliser
- Have extensive programming modes like Absorbance, Single Standard, Multi Standard, Cut off and % Absorbance
- Have latest technology with battery back-up for 125 test with calibration curves.
- Have built in 20 column thermal printer with 384 stationary heads
- Have unique pause mode to use the analyser in absence of printer.
- Have unique circuitry for long lamp life
Product Specification of Automatic Strip Analyser with Built in Stabiliser
- Display:Four Line Back - lit LCD, 4 x 20 char.
- Drift:<0.007 A/hr
- Enclosure:ABS Fire Retardants
- Filter:Type of Filter : Interference
Wave Lenght : 405nm, 450nm, 492nm, 630nm
Half Bandwidth : 10 mn ±2mn
Selection : Automatic by Stepper Motor
- Key Features:1. Robust Systems With built in Stabilizer
2. Extensive Curve Plotting
3. Abillity to read single well
- Light Source:Tungsten halogen, 6 V, 10 W
- Linear Measurment Range:0.000 to 3.000 Absorbance Units(A)
- Mode:Absorbance, Cut - off, Regression, Single Standard, % Absorbance
- Optical Measurement:Photodiode
- Photometric Accuracy:±2% or 0.007 Whichever is Higher, from 0 to 1.5 A
±3% from 1.5 A to 3.0A
- Power:Wattage : 50 Watts
Voltage : 115 - 230 Volts ± 10%, 50 / 60 Hz
- Printer:Built in Thermal Printer 20 Columns 125 Open Channel
- Size:32 x 35 x 11.5 cm
- Storage:Temperature : From 10 °C to 35 °C
Relative Humidity : up to 80 %
- Warm up Time:45 Seconds
- Weight:5
