Product Profile of Solid Granular Ketone Formaldehyde Resin
Polyols & Polymers manufactures Solid Granular Ketone Formaldehyde Resin. Polyols & Polymers is an ISO 9001: 2000 accredited company. The Solid Granular Ketone Formaldehyde Resin is used in making of flexographic inks, gravure inks, lamination inks, lacquers and paper coatings. The Ketone Formaldehyde Resin is useful in heat seal coatings, primer and base coatings, gasoline resistant coatings, nail lacquers etc.
Key Features of Solid Granular Ketone Formaldehyde Resin
- Chemical Classification: Cyclohexanone Formaldehyde Resin
- Physical Form: Pearl Shaped Granular Solid
- Highly effective in imparting gloss, adhesiveness, levelling and also in increasing the solid content leading to a reduction in the VOC.
- The hydroxyl polarity leads to better adhesion and wetting of pigments and surfaces.
- Soluble in alcohol no in menthols
- Compatible with different types of nitrocellulose, benzyl cellulose, ethyl cellulose, cellulose acetate, polyvinyl chloride, chlorinated rubber and many synthetic resins.
- Used in the manufacture of all types of nitro lacquers
- PVC lacquers
- Polishing lacquers and finishes
- Flexographic inks
- Gravure inks
- Lamination inks
- Lacquers
- Paper coatings.
- Seal coatings
- Primer and base coatings
- Gasoline resistant coatings
Product Specification of Solid Granular Ketone Formaldehyde Resin
- Acid Value:< 0.01 mg KOH / gm resin ( Max )
- Chemical Classification:Cyclohexanone Formaldehyde Resin
- Compatibility:POLYTONE K - 9 3 is compatible with different types of nitrocellulose, benzyl cellulose, ethyl cellulose, cellulose acetate, polyvinyl chloride, chlorinated rubber, as well as in many synthetic resins e.g. alkyd resins, pthallic resins, UF resins, polyvinyl butyryl resins, polyamide, phenol formaldehyde condensation resins etc and a multitude of plasticizers.
- Melting Point:98 - 103
- Packing & Packaging:Available in 25 Kg bags.
- Physical Form:Pearl Shaped Granular Solid
- Self life:Store under cool dry conditions . It is recommended that the material be used within 12 months from the date of manufacture.
- Solubility:POLYTONE K - 9 3 is soluble in alcohols (not in methanol), ketones, esters, glycol ether acetates, as well as in some aromatic & chlorinated hydrocarbons. They are however not soluble in water and in aliphatic hydrocarbons.
- Viscosity:Viscosity of 50% solution in 15-17 Sec