Product Profile of Low-Density Cross-Linkable Polyethylene Compound

Low-Density Cross-Linkable Polyethylene Compound is used in medium voltage power cables. The Polyethylene Compound is formulated with very effective antioxidant and peroxide for scorch free extrusion and optimum cure in the CCV line. GEM Polytech Industries Pvt. Ltd, an ISO 9001:2008 certified company, is the manufacturer of Low-Density Cross-Linkable Polyethylene Compound.

GEM Polytech Industries Pvt. Ltd supplies various types of zero halogen low smoke compound, XLPE compound, thermoplastic semi conductive compound, silane grafted polyethylene compound, conductive compounds etc. Low-Density Cross-Linkable Polyethylene Compound comes with 0.922 gm / cube cm density range and has 18 MPa tensile strength at break.

Specifications of Low-Density Cross-Linkable Polyethylene Compound are:

• Density: 0.922 gm / cube cm.

• Tensile Strength at Break: 18 MPa.

• Elongation at break: 500%.

• Variation on tensile strength 168hrs/135 degree C: ± 15%.

• Variation on elongation at break 168hrs/135 degree C: ± 15%.

• Hot Set Elongation under load at 200 degree C, 0.2N/ sq mm: 50%.

• Permanent Elongation after Cooling: ± 5 %.

• Power factor at 50 Hz at 23 degree C: 0.0004.

• Dielectric Constant: 2.3.

• Volume Resistively at 20 degree C: greater than X 10¹6 Ohm cm.

• Dielectric Strength: 30 Kv/mm.