Product Profile of Thermoplastic Polyurethane Spring Pad

M.G.M. Rubber Company offers Thermoplastic Polyurethane Spring Pad. M.G.M. Rubber Company is an ISO 9001:2000 recognized company. Thermoplastic Polyurethane Spring Pad is applied for Railways, Defense, Thermal Power, different Ordinance Factories and various Steel Plants.

Thermoplastic Polyurethane Spring Pad has the following technical specifications:

• Polymer used: NR, SBR, NBR, HNBR, ACM, CR, PU, FE, EPDM, FKM, Silicon, CSM, PBR

• Metal Used: Steel, Cast Iron, Aluminum etc.

• Operation Temperature:-30 -70 degree C

• Operational Atmosphere:

• Heavy/Dusty/Sandy/Corrosive/Salty

• Operational Humidity: 0 to 100 percent

Technical Specifications of Thermoplastic Polyurethane Spring Pad are:

• Polymer used: Thermosetting Polyurethane

• Operation Temperature:-15 degree C to 60 degree C

• Operational Atmosphere:

• Heavy/Dusty/Sandy/Corrosive/Salty

• Operational Humidity: 0 to 100%

• Metal Parts Spec: Steel IS: 1079 Gr.D

• Shore Hardness: 70 to 80

• Tensile Strength: 250 Kg/cm2 Minimum.

• Elongation at Break: 300% Minimum.

• Specific Gravity: 1.25 Max.

• Shear Bond Strength:500 PSI / 35.15 Kg/cm

• Change in SH: &# 177 5

• Change in TS:+10%, -15%

• Change in EB:+10%, -20

Thermoplastic Polyurethane Spring Pad has the following advantages:

• Survives even in extreme atmospheric condition too.

• Massive variety in dynamic lateral & torsional load carrying range - 0.5 Kg to 30,000 Kg.

• Enhanced damping facility. Up to 50% of the applied Load
.

• Extremely rigid quality rubber-metal bonding. Shear Bond strength more than 700 PSI [49.2 Kg/Sq.Cm].