Product Profile of Aluminum made Damper Pads

M.G.M. Rubber Company offers Aluminum made Damper Pads. M.G.M. Rubber Company is an ISO 9001:2000 certified company. Aluminum made Damper Pad is applied in different industries like- Railways, Defense, Thermal Power, different Ordinance Factories and various Steel Plants etc.

Specifications of Aluminum made Damper Pads are:

• Polymer used: NR, SBR, NBR, HNBR, ACM, CR, PU, FE, EPDM, FKM, Silicon, CSM, PBR

• Metal Used: Steel, Cast Iron, etc.

• Operation Temperature:-30 -70 degree C

• Operational Atmosphere:

• Heavy/Dusty/Sandy/Corrosive/Salty

• Operational Humidity: 0 to 100 percent

Technical Specifications of Aluminum made Damper Pads are:

• Polymer used: Natural Rubber suitably blended

• Operation Temperatur:-10§C to 70§C

• Operational Atmosphere:

• Heavy/Dusty/Sandy/Corrosive/Salty

• Operational Humidity:0 to 100%

• Metal Parts Spec: Steel IS:2062

• Shore Hardness: 80 to 90

• Specific Gravity: 1.22 Maximum

• Tensile Strength: 190 Kg/cm2 Minimum.

• Elongation at Break: 250% Minimum.

• Bond Strength: 500 PSI / 35.15 Kg/cm2

• Compression Set: 20% Max.

Aluminum made Damper Pads has the following advantages:

• Survives even in extreme atmospheric condition too.

• Massive variety in dynamic lateral & torsional load carrying range - 0.5 Kg to 30,000 Kg.

• Enhanced damping facility. Up to 50% of the applied Load.

• Extremely rigid quality rubber-metal bonding. Shear Bond strength more than 700 PSI [49.2 Kg/Sq.Cm].