Product Profile of Pump Press with Flow Sensor
Pump Press with Flow Sensor can be fitted with any kind of pump and is has the provision for fixing Pressure gauge. Hitech Systems manufactures Pump Press with Flow Sensor. Hitech Systems offers a wide range of Pumps, Presses and Motors for various industrial applications. The Pump Press with Flow Sensor of model Smart Press 1.5 keeps the pump operating for a brief period [approximately 5 Seconds] after supply has stopped at the tap closing and has a maximum working temperature of 45 °.
Key Features of Pump Press with Flow Sensor
- If there is no water at the suction point it stops the pump without using Float switches [or] Level probes.
- Dry Running Protection.
- Protection Degree IP 55
- It starts automatically when a pressure above the one required to start the motor driven pump is injected in the delivery line.
- Automatic control of pump
- Minimum Pressure setting from 1.5 Bar
- Suitable for Pumps up to 3.0 HP
- Starts the pump when the pressure of the system is less than fixed Pressure.
- Stops when there is no requirement of water.
- Supplied with flow sensor with a geometry which reduces loading losses even with very high flows
- Inlet 1" Male, Outlet 1" Female with brass Inserts.
- Pressure tank can be avoided.
- Display to show lack of water in supply point.
- Maximum working pressure 15 Bar.
- Completely flow through without any pressure drop up to 8 m³ / hr
- Provision for fixing Pressure gauge available in Unit.
Product Specification of Pump Press with Flow Sensor
- Application:Houses, Apartments and Hotels
- Current:10 (Max ) (A)
- HP Range:1.5
- Model:Smart Press 1.5
- Pressure:15 (Max) (Bar)
- Voltage:220
