Product Profile of Electronic Control Device With 220 Voltage

Hitech Systems offers Electronic Control Device with 220 Voltage. Hitech Systems offers range of pumps and motors. The Electronic Control Device with 220 Voltage or Smart Press 3.0 WG offers Dry Running Protection and Protection Degree IP 55. This Electronic Control Device with 220 Voltage can be used in houses, apartments and hotels. It can be fitted with any kind of pump. If there is no water at the suction point, this device with 220 Voltage stops the pump without using Float switches [or] Level probes. It starts automatically when a pressure above the one required to start the motor driven pump is injected in the delivery line.

Advantages of Electronic Control Device with 220 Voltage are:

• Automatic control of pump

• Minimum Pressure setting from 1.5 Bar

• Suitable for Pumps up to 3.0 HP

• Starts the pump when the pressure of the system is less than fixed pressure

• Stops when there is no requirement of water

• Supplied with flow sensor with a geomentry which reduces loading losses even with very high flows

• Maximum water temperature 45degree C

• Inlet 1" Male, Outlet 1" Female with brass inserts

• Keeps the pump operating for a brief period [Approximately 5 Seconds] after supply has stopped at the tap closing

• Display to show lack of water in supply point