Product Profile of Automatic Pump Press with Pressure Gauge
Automatic Pump Press with Pressure Gauge keeps the pump operating for a brief period [approximately 5 Seconds] after supply has stopped at the tap closing and is suitable for Pumps up to 3.0 HP. Hitech Systems supplies Automatic Pump Press with Pressure Gauge. Hitech Systems is the manufacturer of Pumps, Presses and Motors for various industrial applications. The Automatic Pump Press with Pressure Gauge of model Smart Press 1.5 WG starts automatically when a pressure above the one, required to start the motor driven pump is injected in the delivery line.
Key Features of Automatic Pump Press with Pressure Gauge
- Can be fitted with any kind of pump
- If there is no water at the suction point it stops the pump without using Float switches [or] Level probes.
- Automatic control of pump.
- Minimum Pressure setting from 1.5 Bar
- Starts the pump when the pressure of the system is less than fixed Pressure.
- Stops when there is no requirement of water.
- Supplied with flow sensor with a geometry which reduces loading losses even with very high flows
- Maximum water temperature 45° C
- Inlet 1" Male, Outlet 1" Female with brass Inserts.
- Pressure tank can be avoided.
- Display to show lack of water in supply point.
- Maximum working pressure 15 Bar.
- Completely flow through without any pressure drop up to 8 m ³/ hr
- Provision for fixing Pressure gauge available in Unit.
Product Specification of Automatic Pump Press with Pressure Gauge
- Application:Houses, Apartments and Hotels
- Current:10 (Max ) (A)
- HP Range:1.5
- Model:Smart Press 1.5 WG
- Pressure:15 (Max) (Bar)
- Voltage:220
