Product Profile of Automatic Control Pump Press
Automatic Control Pump Press starts automatically when a pressure above the one required to start the motor driven pump is injected in the delivery line and is suitable for Pumps up to 3.0 HP. Hitech Systems offers Automatic Control Pump Press. Hitech Systems supplies a wide range of Pumps, Presses and Motors for various industrial applications. The Automatic Control Pump Press of model Smart Press 3.0 starts the pump when the pressure of the system is less than fixed Pressure and operates at a Maximum working pressure of 15 Bar.
Key Features of Automatic Control Pump Press
- Maximum water temperature 45° C
- Inlet 1" Male, Outlet 1" Female with brass Inserts.
- Pressure tank can be avoided.
- Keeps the pump operating for a brief period [approximately 5 Seconds] after supply has stopped at the tap closing.
- Display to show lack of water in supply point.
- Completely flow through without any pressure drop up to 8 m sup3;/ hr
- Provision for fixing Pressure gauge available in Unit.
- Can be fitted with any kind of pump
- If there is no water at the suction point it stops the pump without using Float switches [or] Level probes.
- Automatic control of pump.
- Dry Running Protection.
- Protection Degree IP 55
- Minimum Pressure setting from 1.5 Bar
- Starts the pump when the pressure of the system is less than fixed Pressure.
- Stops when there is no requirement of water.
- Supplied with flow sensor with a geometry which reduces loading losses even with very high flows
Product Specification of Automatic Control Pump Press
- Application:Houses, Apartments and Hotels
- Current:20 (Max ) (A)
- HP Range:3.0
- Model:Smart Press 3.0
- Pressure:15 (Max) (Bar)
- Voltage:220
