Jumo India Pvt Ltd offers Temperature Limiters or Monitors. Jumo India Pvt Ltd is DIN EN ISO 9001 and DIN EN ISO 14001 certified company. Temperature Limiters or Monitors is marketed as "Electronic temperature monitors/ temperature limiters and safety temperature monitors/ safety temperature limiters". These are found wherever thermal processes need to be monitored, and where the system must be set to a safe condition in the event of a fault. If the permitted temperature limit is reached or a fault occurs within the permitted temperature range [probe break, short-circuit, component defect, power failure], then the device switches off without any delay.
If the fault is no longer present, then limiters TB and STB must be reset manually. This can be done by means of a reset pushbutton on the instrument, or by an external pushbutton. The flow of energy is only enabled again when the temperature is lower [O-function] or higher [S-function] than the preset temperature limit by the amount of the switching differential. In the event of a short-term supply failure [not exceeding 1min] in the satisfactory range of the system, the instrument will be automatically enabled after the power has been restored. The switching differential is 3 degree C, 10 degree C 30 degree C or 100 degree C. The analog set point knob for the limit temperature is mounted on the front panel.
