Product Profile of Plastic Modular Belts With 25 Mm And 50 Mm Pitch

Ultraplast supplies quality conveyor components that go into the manufacturing of a conveyor system. Ultraplast offers Flex Belts; Side flex belts, SMB-25 and SMB-50 can bend in all directions resulting in enhanced conveyor design possibilities. Straight line and curved conveyor sections, side flex belts can be combined into a single section resulting in smoother conveying and better cost efficiency.

It is available in two models therefore the technical specifications are as follows:

• Pitch: 25 mm and 50 mm

• MOC: Acetal [-25°C to +95°C]; Max Tensile load = 1600 kg and Acetal [-25°C to +95°C]; Max Tensile load = 1600 kg

• Pin Diameter: 5 mm SS 304 and 6 mm SS 304

• Approx. Turning Radius [Innermost] 2.8 times the belt width for both models

• Widths: 75 mm to 400 mm and 100 mm to 600mm

• Drive Sprockets:
-For 25mm

• 12 Teeth [OD = 97 mm, Bore = 25 mm round or 40x40 mm sq]

• 16 teeth [OD = 130 mm, Bore = 25 mm round or 40x40 mm sq]

• 20 teeth [OD = 160 mm, Bore = 40x40mm sq or 65x65mm sq]
-For 50mm

• 8 Teeth [OD = 130mm, Bore = 25mm round or 40X40 mm sq]

• 10 Teeth [OD = 160mm, Bore = 25mm round or 40X40 mm sq]

• 12 Teeth [OD = 190mm, Bore = 40X40 mm sq or 65X65 mm sq]