Product Profile of Slipform Kerbing Machine with Two Electronic Sensors
Maxmech Equipments Pvt Ltd supplies Slipform Kerbing Machine with Two Electronic Sensors. Maxmech Equipments Pvt Ltd offers wide ranges of Electronic Concrete Batch Plant, Mobile Concrete Batching / Mixing Plant, Hydrostatic Sensor Pavers, Transit
Mixer, Vibratory Roller, Mobile & Computerized Wet Mix Macadam Plant etc. Slipform Kerbing Machine with Two Electronic Sensors is applicable for highways, footpath up to 1220mm width & 150mm thickness. Small box gutters, etc.
Slipform Kerbing Machine with Two Electronic Sensors is available with:
- At rear there are 4 idle solid tyres rubber wheels 2 on each side mounted equalizer beam. Complete machine is mounted on three hydraulic jacks, one at front & two at rear.
- The front portion carries crawler track and can also be steered by a horizontal hydraulic cylinder.
- The rear portion carries engine with rubber wheels one left hand side of the machine the mould box is suspended from the rear portion with receiving hopper for concrete.
- Two or three hydraulic needle vibrators are fixed inside the receiving hopper for consolidation of concrete before
Entering the mould chamber.
- The mould chamber is closed at front end & open at rear end with approx. Length of 1500mm and with proper design so that on the machine propel in forward direction the concrete kerb is formed smoothly in Slipform manner.
- Two electronic sensors are fitted on side of mould box, the front one is for steering & second rear one is for grade.
- The machine follows the string line which is laid & pre landed by theodolite along the length of the kerbing line
Slope sensor is fitted on the control panel at the centre of the machine.
Technical Specifications of Slipform Kerbing Machine with Two Electronic Sensors are:
- Concrete charging height: 1125 mm