Double Skin Insulated Wall Panels is manufactured by the ISO 9001: 2000 certified company NCL Energy Limited. The Double the Skin Insulated Wall Panels are made in sandwich panel system using two10 mm thick Bison Panel, cement bonded particle asbestos free board conformed to IS: 14276 - 1995, as skins with 27 mm gap in between filled with 27 mm thick expanded polystyrene core having bulk density of 15 kg./ cu.M. Double the Skin Insulated Wall Panels will be strengthened on all four sides by "W" shaped pre-profiled steel section made from 0.63 mm GI steel sheet / coil. The cement sheets/ boards and expanded polystyrene core shall be bonded together using PVA [Polyvinyl Acetate] based bonding material. The Double the Skin Insulated Wall Panels, as offered by NCL Energy Limited can be inserted one by one into "U" shaped ground track of size 52.5 X 35 X1.25 mm made from GI steel sheet / coil. The bottom track can be fixed to the concrete platform at plinth level by suitable fasteners screwed into PVC expandable screw cap. The wall panels shall be interlocked with each other length wise using cold formed rectangular hollow steel section of size 50 X 25 X 1.25 mm. All the four corners shall be concealed with corner angle of 125 X 125 X 1.25 mm made from steel sheet / coil. The top of the Double the Skin Insulated Wall Panels can be concealed with "U" shaped top track of size 52.5 X 35 X 1.25 mm thick from GI steel sheet / coil.
