Product Profile of Gps Based Clock

Aster electrosoft pvt. Ltd. Offers products in the field of telecommunication, defense, railways, transportation and power sectors, providing new product development, product re-engineering and product support services in hardware, software and infrastructure development areas.

Aster electrosoft pvt. Ltd. Offers gps based clock for the railway sector. It is a led based real time rugged clock. With the satellite the clock has self-synchronizes feature. The product has some features like,

• The gps receiver is housed inside the clock unit.

• The clock synchronizes the signals of the satellite to derive universal gmt time and converts the same into accurate ist.

• The clock has self-synchronizes feature with the satellite.

• Ttff hot start is less than 8 seconds and less than 40 seconds cold start.

• Gps clock has adaptive threshold based signal detection for improved reception of week signals

• It gives maximum navigation accuracy for the standard positioning service [sps]

• Gps clock has a serial out put for data

• It has a built in special clock module which converts the gmt to ist.

• The clock synchronizes with the satellite every 6 or 12 hours automatically to keep the link of signals from satellite and synchronize the data.

• Visual indicator is available for indicating the process of synchronizing.

• The clock has a redundant power supply for backup so that in case of main power supply failure also the clock should work for at least 30 minutes.

• The clock supports real time clock chip/bios power backup/maintain for chipset data storage.

• The clock has a portable plug and play antenna.

• The antenna has 3 meter of wire to enable it to fix it out door.

• The antenna has a magnetic provision to mount it out door to expose to the open sky.

• The antenna is all weather proof.

• Clock is mounted on weatherproof casing and is free from any earthing current.

• The clock has data filtration module to protect itself from current disturbance that may occur due to heavy ohe lines running in railways.

• The clock is available in single side and double side modules. Single side clock is wall mountable.

• The standard of protocols used are of international standard and is free of restrictive protocols.

• The gps module used follows universal protocols and is not objectionable in nature and adheres to nmea standard.

• The clock has four digits for hour and minutes and uses a matrix of red colour led`s.

• Flashing leds separates the hour and minutes digits.

• Led matrix for each digit is of size 7`` x 3.5`` with 2 rows of leds.

• The clock body is rugged and weather proof

• Incase of link failure with satellite, the display works with inbuilt real time clock.