Product Profile of Ac Drive: Sinus K
The ISO 9001:2000 certified company BCH Electric Limited produces and supplies AC Drive: Sinus K. Of the various types of AC Drives, the Sinus K AC Drive includes three phase: 4.0 to 355KW - 415VAC. Of the Various Range of AC Drives, the Sinus K Drive has Sensorless Vector torque control or V/F inverter up to 355kW, IP00 up to IP54 protection degree. The Sinus K Drive is one product with 3 functions. For general applications, vector modulation IFD software is available.
The other salient features of AC Drive: Sinus K includes:
- For heavy torque performance, there is sensorless vector control VTC software
- For specific lift applications, vector modulation LIFT software
- Integrated filters on the full range in compliance with EN61800-3 2nd ed. About RFI emission limits.
- Input contactor not necessary
- Reduced dimensions up to 50%
- Intelligent cooling system
- Integrated braking chopper up to S30
- Lower motor noise with carrier frequency up to 16 kHz [IFD and LIFT software]
- Motor PTC thermal probe control
- Easy commissioning with preset parameters for most common applications
- New control panel with 8 keys and large display [optional]
- Regulation of output frequency from 0 to 800Hz [120Hz for VTC software]
- In case of power failure, total control of the motor, down to 0 RPM
- Master-slave function for the operation of several motors connected to the same drive shaft
- Automatic calibration for motor parameters` recognition
- Integrated digital potentiometer
- Integrated multifunctional tester
- Integrated thermal protection of motor
- Programmable multiple acceleration and deceleration ramps
- Feedback from tachometric dynamo or encoder
- 4 programmable analog inputs 0-10Vdc, 0[4]-20mA
- 2 programmable relay output
- Auxiliary voltage 24Vdc, 10Vdc
- 2 programmable analog outputs 0-10Vdc, 0[4]-20mA
- Serial communication RS485 with MODBUS RTU protocol
