Mmp filtration pvt ltd was incepted in the year 1954 dealt in the import and export of various commodities from europe, usa & south east asian countries.Mmp filtration pvt ltd product range includes air filtration and liquid filtration equipments.
The wound pp cartridges are manufactured with an interlocking weave [diagonally wound] which provides an efficient and cost effective cartridge. They offer a gradual pressure drop over cartridge life versus surface media, that have an abrupt cut off when loaded. The larger particles are trapped at the surface as they go down the torturous path of the windings. The material used are fda approved. These cartridges are available in lengths from 10" - 70". The micron ratings offered are 0.2/0.5/1/5/10/25/50/75/100.
Filter construction:
Mmp hydro cartridges are manufactured with an interlocking weave [diagonally wound] which provides efficient and cost effective filter cartridges. These wound cartridges offer a gradual pressure increase over cartridge life versus surface media that have an abrupt flow cut-off when loaded. The larger particles are trapped at the surface of the cartridges and build up a pre-cake, whilst the smaller particles are trapped either in the cartridge filter as they go down the `torturous path` created by the wound pattern which carries with each micron rating.
Filter sizes:
Mmp hydro filters are available in `one piece` costruction in 1016 sizes between 250-1016mm and can be supplied to suit both 247mm [9 3/4"] and nominal 250mm [10"] imported cartridge housings. The one-piece construcyion removes the problem of by-pass which occurs when stacking 250mm long elements into vessels using spacers for sealing between each one. It also dramatically reduces down time and labour costs and in many cases reduces potential health risks through operators having to lean over vessels that may contain liquids and gases.
Filter material:
The cartridges are available with polypropylene, or cotton materials wound into polypropylene, 304 stainless steel or tinned steel cores. The cartridges can be used [in one combination of materials or another] in most areas where chemical compatability is of concern. Special materials are available for high temperature or unusually aggressive applications. Food grade product [fda pp fibre] is always available ex-stock. Activated carbon cartridges are available to remove unpleasant tastes and odours.
Packaging:
The cartridges are individually shrink wrapped in a polyethylene tube which is treated to minimize static build-up. The cartridges are then packed into cardboard carton.
* 114mm dia with 254mm length
[4.5" * 10"] - 8 nos / box
[4.5" * 20"] - 4 nos / box
* 254mm [10"], 30 cartridges per caton.
* all other lengths 15 cartridges per carton.
