Product Profile of Single Stage Centrifugal Pump
Sharp Pumps Private Limited manufactures Single Stage Centrifugal Pump. Sharp Pumps Private Limited offers various types of regenerative pump, agricultural pump, dewatering pump, jet pump etc. Sharp Pumps Private Limited is rewarded with Rajiv Gandhi National Quality Award. Single Stage Centrifugal Pump is suitable for handling clean water not containing abrasive particles and fluids, which are not chemically aggressive to the pump components. Single Stage Centrifugal Pump is available in two models. Single Stage Centrifugal Pump have a rotary motion of a profiled impeller in combination with a shaped pump housing to apply centrifugal force to discharge fluids from the pump. They operate most efficiently in high-volume, low-output-pressure conditions, and unlike positive-displacement pumps, the flow may be controlled allowing flow to be completely closed off while the pump is running.
Key Features of Single Stage Centrifugal Pump
- Pump casting: Grey iron casting
- Impeller: Gun metal / ci
- Shaft:En8/ SS 410
- Mechanical seal: High alumina ceramic and graphite
- Max.suc.head:7 mtrs
- Pumping medium: Clean water free from solids, chemically and mechanically non aggressive
- Liquid temperature: less than 40 degree c
- Ph value: 6.85 - 8.5
- Standard voltage: 240 v to 220v / 50hz
- Rating: Continuous [s1]
- Ins.class:B
- Protection: Ip 54
- Speed:2800 rpm
- Motor design: Tefc
- Industry - For all types of applications demanding standardized, DIN-normed pumps
- Hygienic - For Food, Pharmaceuticals and Biotechnology
- Water handling - For irrigation, drainage and fresh water
- Chemical/petrochemical - For transport of slightly contaminated thin liquids
- Greenhouse - For heating, distribution of artificial fertilizers, irrigation and drainage
- Marine - For bilge pumping, engine cooling and as ballast pumps
Product Specification of Single Stage Centrifugal Pump
- Body Materials:ALUMINIUM EXTRUDED / CI
- CASTING:GREY IRON CASTING
- Impeller:GUN METAL / CI
- MECHANICAL SEAL:HIGH ALUMINA CERAMIC AND GRAPHITE
- pH:6.85 - 8.5
- Power Voltage:240 V TO 220V / 50HZ
- Protection:IP 54
- PUMPING MEDIUM:CLEAN WATER FREE FROM SOLIDS, CHEMICALLY AND MECHANICALLY NON AGRESSIVE
- Rating:CONTINUOUS (S1)
- Shaft:EN8/ SS 410
- Speed:2800