Product Profile of Injection Moulding Machine: Model- Blenzor- Injm-1000
Blenzor tm, a leading designer, manufacturer, exporter & project consultant of automatic packaging, machines such as powder filling, liquid filling, tube filling, paste filling, pouch packing, sealing, capping & other processing machines for foods, pharma, cosmetics & engineering industries.
Materials and shapes
- Thermoplastics dominate, but can also be used for thermosets, rubbers, polymer foams and short-fibre composites.
- Can make intricate shapes, though not suitable for thick sections.
- Typical part sizes are 100-600g, although parts up to 25kg can be made at great expense.
- Parts generally do not require finishing, although parts for feeders etc. May require removal.
- A wide variety of surface finishes and embosses can easily be incorporated into the die design.
- Thermoplastic scrap is easily recycled, but other materials must be disposed of carefully.
Economics
- To reduce costs, several parts are often moulded together on a "tree-like" structure; parts can then be separated after moulding.
- The cycle time is limited by solidification time and time to open and close the mould. Production rates from 1-20 parts/minute are readily achievable.
- Capital cost for machines are from £10,000 - £100,000 and dies can cost between £1,000 and £10,000.
- Injection moulding is only economic for batches of 10,000 - 100,000 or more and so is usually automated.
Typical products
- Electrical and plumbing fittings
