Product Profile of Totally Configurable Safety Controller
Totally Configurable Safety Controller monitors numerous safety devices such as E-stop buttons, interlocking switches, safety light screens, two-hand controls and rope pull switches. The Safety Controller is provided with 22 input terminals that can monitor both contact-based and PNP solid-state outputs from any devices. The Safety Controller of model number SC22-3 is designed with 3 pairs of solid-state safety outputs rated at 0.75A each [24V DC]. The Totally Configurable Safety Controller has 10 configurable auxiliary status outputs to track inputs, outputs, lockout, I/O status and other functions.
Totally Configurable Safety Controller is manufactured by Banner Engineering India. Banner Engineering India also manufactures a wide range of sensors and associated products for factory and process automation applications. The range of products include Photoelectric sensors, Ultrasonic Sensors, Slot Sensors, Measuring Array Sensors, Remote Amplifier Photo-electrics, Fibre Optic Systems, Colour Mark Sensors, Luminescence Sensors, Laser Sensors, Optical Touch Buttons, Radar Sensors, Temperature Sensors, Vision Lighting system, Wireless I/O, Indicator Lights & Pick-to-Light Sensors etc.
Key Features of Totally Configurable Safety Controller
- 22 input terminals can monitor both contact-based or PNP solid-state outputs from Banner devices or any other manufacturers
- Each input can be a non-safety input, or configured for control reliability or category 2, 3 or 4 safety circuit performance per ISO 13849-1
- 3 pairs of solid-state safety outputs rated at 0.75A each (24V DC) with selectable one- or two-channel external device monitoring and ON-delay or OFF-delay
- 10 configurable auxiliary status outputs track inputs, outputs, lockout, I/O status and other functions
- Easy configuration with built-in front panel LCD display or PC Interface
- Live Display and a Fault Log provide real-time system and fault history identification
- Controller is designed to meet stringent standards including Safety Integrity Level (SIL) 3 per IEC 62061 and IEC 61508, and Category 4 Performance Level (PL e) per ISO 13849-1
Product Specification of Totally Configurable Safety Controller
- REACTION TIME:Response time (ON to OFF):10 milliseconds max. (with standard 6 milliseconds debounce; this can increase if debounce time increases. Refer to the configuration summary for actual response time.), Reaction time (OFF to ON):400 milliseconds max. (with manual reset option), Reaction time (OFF to ON):400 milliseconds max. plus input debounce time (auto reset).
- Current:Sourcing current:30 mA minimum continuous (3V dc max. drop)
- EMC standards:Meets or exceeds all EMC requirements in IEC 61131-2, IEC 61496-1 (Type 4), and IEC 62061 Annex E, Table E.1 (increased immunity levels)
- Power:24V dc, ± 20%, 0.4 A (controller only), 5.9 A (all outputs ON @ full rated load)
- Rating:Environmental Rating: NEMA 1 (IEC IP20), for use inside NEMA 3 (IEC IP54) or better enclosure
- Resistance:Input lead resistance:300 ohms max. (150 ohms per lead)
- Shock:15 g for 11 milliseconds, half sine, 18 shocks total (per IEC 61131-2)
- Vibration:3.5 mm occasional / 1.75 mm continuous @ 5Hz to 9 Hz, 1.0 g occasional and 0.5 g continuous @ 9 to 150 Hz: (per IEC 61131-2) and 0.35 mm single amplitude / 0.70 mm peak-to-peak @ 10 to 55 Hz (per IEC 61496-1), all @ 10 sweep cycles per axis
- Terminals:Screw terminals: Wire sizes:16, 18, 20, 22 or 24 AWG (0.20 – 1.31 mm2), Wire strip length:5.00 mm, Tightening torque:0.23 Nm (2 in. lbs) nominal, Tightening torque:0.34 Nm (3.0 in. lbs) maximum; Clamp terminals: Wire size:16, 18, 20, 22, or 24 AWG (0.20 – 1.31 mm2), Wire strip length:9.00 mm.
