www.jimtrade.com
Menu

Microprocessor Based Automatic Bagging Machine Controller

Microprocessor Based Automatic Bagging Machine Controller

Product Category :    Machine Controls

Supplier                :    Core Technologies

Key Features of Microprocessor Based Automatic Bagging Machine Controller

  • One Shot key based calibration
  • Programmable auto correction
  • Auto Jog Feature


Inquire Now
Product Profile of Microprocessor Based Automatic Bagging Machine Controller

Microprocessor Based Automatic Bagging Machine Controller of model number UC 603 is offered with dry-run feature that helps to checkout operation of all output devices and tests the status of inputs without the need for material in the hopper. The Bagging Machine Controller is provided with auto correction facility that takes care of feed rate variations and ensures weight within tolerance by trimming the fine cut point. The Bagging Machine Controller is available with an auto jog feature, which initiates dribble cycle again if the weight filled is below target weight, with pre-programmed feed rate and time to top up the filling operation and ensure that no bag is under weight. Microprocessor Based Automatic Bagging Machine Controller comes in 1.0mV/V to 3.0 mV/V capacity range and filling rates of 600 bags per hour for 100Kg.

Core Technologies is the manufacturer of Microprocessor Based Automatic Bagging Machine Controller. Core Technologies offers wide range of dynamic weighing machine controllers, Tamper proof data loggers for pharmaceutical industry, high speed sequence of events recorders for power sector, weather monitoring stations, loop powered industrial transmitters, strain gauge instrumentation and automated test equipment.

Key Features of Microprocessor Based Automatic Bagging Machine Controller
  • One Shot key based calibration
  • Programmable auto correction
  • Auto Jog Feature
  • Multiple dump feature
  • Easy to install and use
  • Resolution: 1 part in 10,000 such as 10g in 100 Kg
  • Power: 160 to 265 VAC, 50-60 Hz.
  • Speed: Filling rates of 600 bags per Hour for 100Kg
  • Capacity: 1.0mV/V to 3.0 mV/V
  • Load cell: Strain gauge type, 350 Ohms nominal
  • Inputs Logic: NPN OC Type sensor inputs and Dry contacts of relays/ switches total 8 inputs
  • Outputs Logic: 8 NO/NC relay changeover dry contacts with 24 VDC or 230 VAC capacity
Recently Updated Products



Autoleveller Drawframe Machine Control System
Autoleveller Drawframe Machine Control System
Supplier    :    Sheltronics
Inquire Now
Machine Controller With Large Memory
Machine Controller With Large Memory
Supplier    :    Computer Controlls Corporation
Inquire Now
Machine Control Panel
Machine Control Panel
Supplier    :    R. K. Electricals
Inquire Now
Injection Moulding Machine Controller
Injection Moulding Machine Controller
Supplier    :    Asia Automation Pvt. Ltd.
Inquire Now
Yarn Mercersing Machine Controlled By Ptc Controller
Yarn Mercersing Machine Controlled By Ptc Controller
Supplier    :    Peass Industrial Engineers Ltd.
Inquire Now