Gala screening solutions offers standard screening solutions for food, mineral and metal powder, paper, ceramics, paint and sugar industries. Only high quality stainless steel of 1.6 mm / 2.0 mm thickness manufactured by reputed brand supplier is used. Pu bushings are provided in the spring stud for noise reduction. High quality imported washproof bearing gel is used for top and bottom bearings. Wire mesh is fixed on a stainless steel ring with proper tension by means of a special jig and fixture arrangement to achieve maximum screening efficiency and mesh life. Coarse mesh is provided beneath fine meshes to give proper support and reinforcement to the fine mesh. In case there is a heavy load on the screen [via, solid liquid separation] center tensioning bolt is provided to hold screen in proper tension. Special heavy-duty imported cylindrical and roller bearings are used in the motor for longer running life. Winding of motor is done with imported thicker copper wire to withstand any minute fluctuations in current. Specially designed round cross section springs are provided for better vibration and operating efficiency. Imported wire mesh cloth is used to manufacture screens and to provide accurate particle size separation. Oil seals are provided in the motor to prevent any water or dust from going inside the motor. Neoprene rubber gaskets are provided along with v-clamps to prevent leakage. Arrangements for adjustment of the top out of balance weight without removing the sieve deck assembly can be provided if required. User-friendly toggle clamps are used to tighten v-clamps, which make assembly and dismantling of decks and frames possible in a few minutes.
