Product Profile of Modular System Scaffold With Wedge Fixing

Wheels Scaffolding [India] Ltd. Manufactures Modular System Scaffold with Wedge Fixing. Wheels Scaffolding [India] Ltd. Is an ISO 9001-2000 certified Company. The Modular System Scaffold with Wedge Fixing, also known as KwikStage system or kwikform is used for building and construction industries. The wedge fixing of the ledgers and transoms of the system gives a simple and fast means of erecting access scaffolding without loose parts, its rigid 4 way fixing giving a positive location without movement, spigot and wedge fitting on the standard to give guaranteed vertical alignment.

Different types of Modular System Scaffold with Wedge Fixing are:

• KwikStage Standards / Verticals: It form the support or the uprights and are made from Standard Scaffold Tubes of 48.3 X 4 mm thick. They have a series of "V" Pressed welded at nominal 495 mm on the tube to provide a location for ledger and transoms.

• Kwik Stage / Quickwedge Ledgers: These items are made from tube with a cast wedge-fixing device at each ends. These are used to tie in the uprights or standards longitudtinally.

• Kwik Stage Transoms: They are a rolled "T" section with wedge fixing device on each ends. Also available with back to back angles of 50 X 50 X 5 mm to form a "T" These transoms engaged with "V" pressing.

• Kwik Stage Board Brackets: The One, Two and Three Board Stage Brackets enables an additional 255 mm, 450 mm and 675 mm platform respectively to be provided on the inside of the Scaffold nearset the building.

• Kwik Stage Tie Bar: A length of 38 mm X 38 mm angle iron with a dowl at both ends. Used to connect stage brackets together.

• Kwik Stage Face Brace: Diagonal Brace has pivoting active wedge fittings welded to each end, which locate the "V" pressing on the standards. Used to form faced bracing. All sizes are available.