Product Profile of Moisture Meter For Mixer
Moisture Meter for Mixer enables the sensor to be remotely configured, calibrated or interrogated for diagnostics purposes as well as for facilitating software upgrades. The Moisture Meter is built for rugged use with a hardened steel protection wear ring and ceramic face plate which may easily be replaced in the event of accident damage. The Moisture Meter is suitable for interfacing directly with all control systems. The Moisture Meter for Mixer comes in flush mounted version and allows remote communication.
NK Instruments Pvt. Ltd. Offers Moisture Meter for Mixer. NK Instruments Pvt. Ltd. Supplies a wide range of process instruments for indication and control of process parameters like Pressure, Differential Pressure, Vacuum, Temperature, Level, Flow, Vibration, Moisture, Conductivity, TDS and Density. The range of products include pressure switches, differential pressure switches, vacuum switches, differential pressure gauge, flow meters, level switches, radar level transmitters, digital moisture meter, pressure transmitters, temperature switches, vibration switches etc.
Key Features of Moisture Meter For Mixer
- Highest possible accuracy of measurement
- Remote communication with Hydro-Com software allows configuration of all sensor parameters including selection of sensor outputs, calibration of sensor readings and software upgrades
- Quick responses to changing conditions with internal filtering to provide meaningful readings
- Temperature reading of sensor also available
- Consistent performance with no need for recalibration other than for use other materials
- Ease of interfacing with other systems with selectable linear outputs (analogue or digital) to suit all requirements
- Tough and reliable with proven track record
- Easily replaced ceramic and wear ring
Product Specification of Moisture Meter For Mixer
- Analog Outputs:Two configurable 4-20 mA or 0-20 mA current loop structure
- Capability:Backward capability : The Hydro-mix VII is backwardly compatible with earlier Hydro-Mix sensor.
- Communication:Digital (Serial) Communication : Opto-Isolated RS485 2-wire port. RS232 converter. Ethernet and USB interface available. Programming details to access sensor values and parameters are available on request.
- Construction:Body : Stainless Steel, Faceplate : Ceramic, Protection Ring : Hardened Steel
- Digital Input:2 configurable digital siginals
- Digital Output:2 configurable digital siginals
- Extension Cable:Six twisted pairs, 22AWG, 0.35 mm² conductors. Screen braid with 65% minimum coverage plus aluminium/polyester foil. Maximum cable run of 100m.
- Fixing:The sensor requires a 127 mm (5 inch) hole to be cut. A Fixing Plate is welded around the hole and the sensor is secured to the Fixing Plate using the Adjustable Clamp Ring. The Clamp ring allows easy installation, extraction and adjustment of the sensor.
- Moisture Range:The sensor will measure up to saturation of mater4ial.
- Operating Temperature:0-60 degree C. The sensor will not measure ice.
- Penetration:Penetration of field : Approximately 75-100 mm dependant upon material.
- Power Supply:+15 V to +30 V DC, 4 W
- Refresh Rate:25 times per second
