Product Profile of Moisture Meter For Bulk Material
Moisture Meter for Bulk Material is based on microwave sensor made of high graded raw material and can be fitted with standard sleeve and extension mounting kit. The Moisture Meter has the body made using cast stainless steel and end cap made of stainless steel. The Moisture Meter can measure up to the point of saturation typically 0-20% for construction materials. The Moisture Meter for Bulk Material is capable of operating under temperature ranging from 0 to 60 degree C.
NK Instruments Pvt. Ltd. Supplies Moisture Meter for Bulk Material. NK Instruments Pvt. Ltd. Offers a wide range of process instruments for indication and control of process parameters like Pressure, Differential Pressure, Vacuum, Temperature, Level, Flow, Vibration, Moisture, Conductivity, TDS and Density. The range of products include pressure switches, differential pressure switches, vacuum switches, differential pressure gauge, flow meters, level switches, radar level transmitters, digital moisture meter, pressure transmitters, temperature switches, vibration switches etc.
Key Features of Moisture Meter For Bulk Material
- Body: cast stainless steel (ANC3B 18/8SS)
- End cap: stainless steel (AISI 316)
- Faceplate: alumina ceramic
- For bulk materials the sensor will measure up to the point of saturation typically 0-20% for construction materials
- Refresh rate: Outputs are updated approximately 25 times per second
- The sensor body is connected to the cable shield ensuring potential bonding of all exposed metal work
Product Specification of Moisture Meter For Bulk Material
- Analog Outputs:Configurable 0-20 mA or 4-20 mA current loop source. For 0-10 Vdc output an external 500 R load resistor should be connected across the analogue output at the control system.
- Construction:Body : Cast Stainless Steel (ANC3B 18/8SS), Endcap : Stainless Steel (AISI 316), Faceplate : alumina ceramic
- Extension Cable:HP02T, HP02C
- Moisture Range:For bulk materials the sensor will measure up to the point of saturation, typically 0-20% for construction materials
- Operating Temperature:0-60 °C. The sensor will not measure moisture in frozen materials.
- Penetration:Approximately 75-100 mm dependant on material.
- Power Supply:+15 Vdc to +30Vdc. 3 watts max.
- Refresh Rate:Outputs are updated approximately 25 times per second.