Product Profile of Welding Inverter with 5-400 A Output Current Range
Welding Inverter with 5-400 A Output Current Range is manufactured by Electronics Devices. This inverter of model SW400PW Comes without HF starts and with sellable up slope and down slope timings along with pulsing control for peak and base current, most suitable where high frequency is not permissible to use still can achieve the same control using only Lift Arc technology.Electronics Devices also manufactures heating equipment, dielectric heating equipment, induction heating equipment, online induction cap sealing systems, cap sealing machines, electronic heating machine, sigma flex heating equipment, electronic sealing machine, etc.
Key Features of Welding Inverter with 5-400 A Output Current Range
- Mobility: This 50 Kgs. inverter has 4 wheels so that the operator can move it easily from one location to another.
- Low OCV: During energy saving, OCV goes down to as low as 20
- VDC for added safety and energy saving.
- Adaptive Hot Start: Sigma Weld prevents electrode from sticking and gives clean start each time.
- Single Amperage Range: Digital front panel allows the operator to set the current is required in single increment also.
- TIG Ignition Lift-Arc: Sigma Weld provides TIG arc starting and there is no need to use of high frequency.
- In Built Gas Solenoid Valve: Operator can use very light TIG torch and use gas only as required, ensuring zero wastage of gas.
- Thermal overload protection: Reliable thermal shutdown mechanism in place, in case of overuse or blockage in airflow.
- Power Fluctuation Compensation: Power source does not get affected and it remains constant regardless of fluctuation in input power + 10 %. It is especially suitable for the Indian Industry.
- Digital Ampere Reading: During welding, it continuously monitors and displays weld current.
- Robust: Sigma Weld can work with cable length of up to 50 m with reduced duty cycle.
- Versatile: Sigma Weld can weld using all types of welding electrodes [suitable for 6010, 6013, 7018 and equivalent electrodes].
- Process Memory Recall: It remembers separately the settings for each and every process. This leads to fast set up time between process changes and each Power ON.
- Energy Saving Mode: When operator is not welding for 2 minutes, then welding inverter in Manual / Stick mode goes into energy save mode, enabling saving of unwanted energy loss.
- Rated Input Voltage: 3-phase 415V + 10% 50/60 Hz
- Rated Power [KVA] at 100%: 13 KVA
- Rated Current Duty Cycle: 50% at 400 A; 100% at 260 A
- OCV-DC: 80 V [nominal]; 20 V [energy saving mode]
- Energy Save: In built
Product Specification of Welding Inverter with 5-400 A Output Current Range
- Base Current:5A - 100% of Peak Current
- Duty Cycle:50% @ 400 A (Rated Current)
100% @ 260 A (Rated Current)
- High Frequency:1) Up Slope Time : 0.1 - 10.0 Sec
2) Down Slope Time : 0.1 - 10.0 Sec
- Output Current:5-400 A (Range)
- Peak Current:400 A
- Power Rating:13 KVA (at 100%)
- Rated Input Voltage:3-phase 415V ± 10% 50/60 Hz
