Product Profile of Manual/TIG Welding Inverter with Auto-Adjusted Arc Force
This welding inverter of model Sigma Weld 250MT Includes the basic features, which are necessary for DCTIG or Stick welding applications. Electronics Devices manufactures Manual/TIG Welding Inverter with Auto-adjusted Arc Force. Electronics Devices also manufactures heating equipment, dielectric heating equipment, induction heating equipment, online induction cap sealing systems, cap sealing machines, electronic heating machine, sigma flex heating equipment, electronic sealing machine, etc.
Key Features of Manual/TIG Welding Inverter with Auto-Adjusted Arc Force
- Mobility: This 30 Kg. inverter has 4 wheels, so that the operator can move from one place to another place without any difficulty.
- Low OCV: During energy saving, OCV goes down, to as low as 20 VDC for added safety and energy saving.
- Adaptive Hot Start: Sigma Weld prevents electrode from sticking and gives clean start each time.
- Single Amperage Range: Digital front panel allows the operator to set the current is required in single increment also.
- TIG Ignition - Lift-Arc: Sigma Weld provides TIG arc starting and there is no need to use of high frequency.
- In Built Gas Solenoid Valve: Operator can use very light TIG torch and use gas only as required, ensuring zero wastage of gas.
- Thermal overload protection: Reliable thermal shutdown mechanism in place, in case of overuse or blockage in airflow.
- Power Fluctuation Compensation: Power source does not get affected and it remains constant regardless of fluctuation in input power + 15%. It is suitable especially for the Indian Industry.
- Digital Ampere Reading: During welding, it continuously monitors and displays weld current.
- Robust: Sigma Weld can work with cable length of upto 50 m with reduced duty cycle.
- Versatile: Sigma Weld can weld using all types of welding electrodes [suitable for 6010, 6013, 7018 and equivalent electrodes].
- Process Memory Recall: It remembers separately the settings for each and every process this leads to fast set up time between process changes and each Power ON.
- Energy Saving Mode: When operator is not welding for 2 minutes, then welding inverter in Manual / Stick mode goes into energy save mode, enabling saving of unwanted energy loss.
- Rated Input Voltage: 3-phase 415V+ 10%
- Rated Power [KVA] at 80%: 9 KVA
- Rated Power [KVA] at 100%: 7 KVA
- Rated Duty Cycle 80%: 250 A
- Rated Duty Cycle 100% 200 A
- OCV-DC [Nominal]: 80 V
- OCV-DC [Energy Saving Mode]: 20 V
- Energy Save: In built
Product Specification of Manual/TIG Welding Inverter with Auto-Adjusted Arc Force
- Duty Cycle:250 A (at 80%)
200 A (at 100%)
- Output Current:5 - 250 A (Range)
- Peak Current:250A
- Power Rating:9 KVA (at 80% )
7 KVA (at 100% )
- Rated Input Voltage:3-phase 415V± 10%
- Weight:30 Kg
