Product Profile of Manual/TIG Welding Inverter with 170 A Peak Current
This inverter of model name TIG - Sigma Weld 170UD Comes without HF starts with settable up slope and down slope timings along with Pulsing Control for Peak and Base Current, most suitable where high frequency is not permissible to use still can achieve the same control using only Lift Arc technology. Electronics Devices manufactures Manual/TIG Welding Inverter with 170 A Peak Current. Electronics Devices is the supplier of heating equipment, dielectric heating equipment, induction heating equipment, online induction cap sealing systems, cap sealing machines, electronic heating machine, sigma flex heating equipment, electronic sealing machine, etc.
Key Features of Manual/TIG Welding Inverter with 170 A Peak Current
- Portable: It is very portable at 12 Kgs. [basic inverter] operator can move from one place to another place without any difficulty.
- Low OCV: During energy saving, OCV goes down to as low as 20 VDC for added safety and energy saving.
- Adaptive Hot Start: Sigma Weld prevents electrode from sticking and gives clean start each time.
- Single Amperage Range: Digital front panel allows the operator to set the current is required in single increment also.
- TIG Ignition - Lift-Arc: Sigma Weld provides TIG arc starting and there is no need to use of high frequency.
- In Built Gas Solenoid Valve: Operator can use very light TIG torch and use gas only as required, ensuring zero wastage of gas.
- Thermal overload protection: Reliable thermal shutdown mechanism in place, in case of overuse or blockage in airflow.
- Fan as Needed: Sigma Weld automatically operates the fan as needed, reducing the noise, power consumption and the airborne contaminants pulled through the machine.
- Power Fluctuation Compensation: Power source does not get affected and it remains constant regardless of fluctuation in input power + 15%. It is suitable especially for the Indian Industry.
- Digital Ampere Reading: During welding, it continuously monitors and displays weld current.
- Robust: Sigma Weld can work with cable length of upto 50 m with reduced duty cycle.
- Versatile: Sigma Weld can weld using all types of welding electrodes [suitable for 6010, 6013, 7018 and equivalent electrodes].
- Process Memory Recall: It remembers separately the settings for each and every process. This leads to fast set up time between process changes and each Power ON.
- Energy Saving Mode: When operator is not welding for 2 minutes, then welding inverter in Manual / Stick mode goes into energy save mode, enabling saving of unwanted energy loss.
- Rated Input Voltage: 1-phase 230V + 10% 50/60 Hz
- Rated Power [KVA] at 100%: 5. 1 KVA
- Rated Current Duty Cycle: 70% at 170 A, 100% at 130 A
- OCV-DC: 80 V [nominal]; 20 V [energy saving mode]
- Energy Save: In built
Product Specification of Manual/TIG Welding Inverter with 170 A Peak Current
- Dimensions:400mm x 190mm x 280mm (D x W x H)
- Duty Cycle:70% @ 170 A (Rated Current)
100% @ 130 A (Rated Current)
- High Frequency:1) Up Slope Time : 0.1 - 10.0 Sec
2) Down Slope Time : 0.1 - 10.0 Sec
- Peak Current:170 A
- Power Rating:5. 1 KVA (at 100% )
- Rated Input Voltage:1-phase 230V ± 10% 50/60 Hz
- Weight:12 Kgs
