www.jimtrade.com
Menu

Digital Welding Manual/Tig Inverter Without Hf Starts

Digital Welding Manual/Tig Inverter Without Hf Starts

Product Category :    Inverters

Supplier                :    Electronics Devices

Key Features of Digital Welding Manual/TIG Inverter without HF Starts

  • Mobility: This 55 Kgs. inverter has 4 wheels so that the operator can move it easily from one location to another.
  • Low OCV: During energy saving, OCV goes down to as low as 20 VDC for added safety and energy saving.
  • Adaptive Hot Start: Sigma Weld prevents electrode from sticking and gives clean start each time.


Inquire Now
Product Profile of Digital Welding Manual/TIG Inverter without HF Starts

This inverter of model number SW600PW Comes with settable up slope and down slope timings along with pulsing control for peak and base current, most suitable where high frequency is not permissible to use still can achieve the same control using only Lift Arc technology. Electronics Devices manufactures Digital Welding Manual/TIG Inverter without HF Starts. This welding machine is IGBT based inverter with total digital control having wide current range.

Key Features of Digital Welding Manual/TIG Inverter without HF Starts
  • Mobility: This 55 Kgs. inverter has 4 wheels so that the operator can move it easily from one location to another.
  • Low OCV: During energy saving, OCV goes down to as low as 20 VDC for added safety and energy saving.
  • Adaptive Hot Start: Sigma Weld prevents electrode from sticking and gives clean start each time.
  • Single Amperage Range: Digital front panel allows the operator to set the current is required in single increment also.
  • TIG Ignition - Lift-Arc: Sigma Weld provides TIG arc starting and there is no need to use of high frequency.
  • In Built Gas Solenoid Valve: Operator can use very light TIG torch and use gas only as required, ensuring zero wastage of gas.
  • Thermal overload protection: Reliable thermal shutdown mechanism in place, in case of overuse or blockage in airflow.
  • Power Fluctuation Compensation: Power source does not get affected and it remains constant regardless of fluctuation in input power + 15 %. It`s suitable especially for the Indian Industry.
  • Digital Ampere Reading: During welding, it continuously monitors and displays weld current.
  • Robust: Sigma Weld can work with cable length of upto 50 m with reduced duty cycle.
  • Versatile: Sigma Weld can weld using all types of welding electrodes [suitable for 6010. 6013, 7018 and equivalent electrodes].
  • Process Memory Recall: It remembers separately the settings for each and every process. This leads to fast set up time between process changes and each Power ON.
  • Energy Saving Mode: When operator is not weld using for 2 minutes, then welding inverter in Manual / Stick mode goes into energy save mode, enabling saving of unwanted energy loss.
  • Rated Input Voltage: 3-phase 415V + 10% 50/60 Hz
  • Rated Power [KVA] at 100%: 22 KVA
  • Rated Current Duty Cycle: 40% @ 600 A 100% @ 350 A
  • OCV-DC: 80 V [nominal]; 20 V [energy saving mode]
  • Energy Save: In built
Recently Updated Products



Compact Grid Tie Inverter
Compact Grid Tie Inverter
Supplier    :    Ksolare Energy Private Ltd.
Inquire Now
On-Grid Single Phase Inverter
On-Grid Single Phase Inverter
Supplier    :    Australian Premium Solar (India) Pvt. Ltd
Inquire Now
Pure Sine Wave Solar Power Inverter
Pure Sine Wave Solar Power Inverter
Supplier    :    Fujiyama Power Systems Pvt Ltd
Inquire Now
Solar MPPT Inverter and Charger
Solar MPPT Inverter and Charger
Supplier    :    Glow Power Technologies
Inquire Now
Solar MPPT Inverter and Charger
Solar MPPT Inverter and Charger
Supplier    :    Glow Power Technologies
Inquire Now