Product Profile of Bolted Bonnet Globe Valve
Bolted Bonnet Globe Valve is available in various sizes ranging from 2" to 6" and can work under pressure. The Globe Valve comes in outside screw and yoke construction along with flanged or butt weld ends for ease of operation. Laxmi Valves Industries manufactures Bolted Bonnet Globe Valve.
Laxmi Valves Industries offers a wide range of industrial valves such as ball valve, gate valve, check valve, globe valve, flush bottom valve, safety relief valve, level gauge valve, strainer, piston valve and steam traps. The Bolted Bonnet Globe Valve can operate at a pressure range of 150 PSI and 300 PSI and is made from materials like CF8M, CF8 and C.S.
Key Features of Bolted Bonnet Globe Valve
- Outside screw and yoke construction.
- Angle and Y-type design available.
- Flanged end or Butt weld ends.
- Valves provided with back seating arrangement.
- Regulating, guided and soft-seated plugs are available.
- Extended bonnet provided for low temperature and cryogenic services [cold box and non-cold box applications] to confirm to requirements of BS 6364.
- Specially designed die formed graphite packing, controlled clearances between stem, gland and bonnet bushing for guaranteed low emissions.
- Renewable, Seal welded seat ring or Integral seat [Cast SS only] available.
- Deep stuffing box - with lantern ring optional.
- Self-aligning, two piece gland.
- Anti-friction ball thrust bearing in yoke sleeve for higher sizes and classes.
- Locking arrangement optional.
- Optional gear, electric or pneumatic Actuator available.
- Meets design requirement of ASME B16.34 / BS 1873 and testing requirement of BS 6755.
- Flanged end dimensions confirm to ASME B16.5 / AP] 605 / BS 3293 / DIN.
- Ring joint facings available in higher classes.
- Butt weld end dimensions confirm to ASME B16.25
- Face to Face and End to End dimensions confirm to ASME B16.10 BS 2080 / DIN
