Flow control industries suppliesoffers stainless steel cartridge housings. Filter housingthese are constructeddesigned and formedmanufactured for use in the clarification or final filtration of liquids or gases through cartridge filters. The filter housings are structureddesigned to asme code standards, all welds are ground flush, and the wholeentire housing is polished to a high-quality sanitary finish. The filter housings have a removable cartridge manifold whichto permitsallow for complete disassembly of the downstream side, and the filter housing also provide ease of cleaning of all fluid contact surfaces. The housings are in-line, steam-sterilisable and hot-water or chemically sanitisable, for ultra cleaning or sterilizing large volumes of liquids or gases at high flow rates by pressure filtration through as many as 12 cartridge filters workingacting in parallel to these cartridge filters provide a very large total filter area. The multi tube assembly containsconsists of a bell housing in which the cartridge filters are supported on a common outlet manifold, available with maximum capacities of 12 cartridges. Inlet and outlet of cartridge filters connections are composed made to elbows under the base plate, which allowsing cartridge replacement without disconnecting joinedattached plumbing. Multi candle housing can be sterilised with cartridges in place using ethylene oxide gas, or hot water sanitised. They can also be in-line steam sterilised. Materials of construction can be ss 304 or ss 316. End connections are normally tri-clamped fittings.
