Triple-Axis Lump And Neck-Down Detectors

Triple-Axis Lump And Neck-Down Detectors

Product Category :    Detectors

Supplier                :    Proton Instruments Pvt. Ltd.

Inquire Now
Product Profile of Triple-Axis Lump And Neck-Down Detectors

Proton Instruments Pvt. Ltd. Manufactures Triple-Axis Lump and Neck-down Detectors. Proton Instruments Pvt. Ltd. Is an ISO 9001 registered organization. Proton Instruments Pvt. Ltd. Offers instrumentation and control equipment for use in industrial production. The Triple-Axis Lump and Neck-down Detectors provides outstanding product quality supervision. The 3 LED Constant Light Sources cover the complete circumference of the product, and any immediate change in the surface pole is detected by the LED optical receiver, Alarming and Reporting the height, length and location of lumps and necks along and around the product. The Triple-Axis Lump and Neck-down Detectors are easy to install, integrate and use. This device can be used as a stand alone device or integrated to the machine PLC. Audio / Visual Alarm, Fault Printer and Datalogging PC Software are available to compliment the Lump and Neck Detector, closing the loop on Quality Control. The applications of Triple-Axis Lump and Neck-down Detectors include production processes such as Wire Drawing, Braiding, Cable Insulating and Jacketing, Rewinding and Coiling, Rubber and Plastic Extrusion Processes for Hose, Tube and Pipe production.

Ambient Temperature

5°C ~ 45°C (41°C ~ 113°F)

Analog Inputs

0 - 10 Vdc scalable input. For remote setting of flaw height

Analog Outputs

3 x
(Option) ± 10 Vdc Scalable output. X, Y, Z

Digital Inputs

Max. input 24 Vdc. Length reset; End of reel / Print activation

Fault Height

Min. 0.04 mm (0.0016 inch) + 1% of object diameter
Min. 0.5 mm (0.02 inch)

Gate Size

30 mm (1.18 inch)

Gauge Head Dimensions

50 x 320 x 292

Gauge Weight

3 kg (6.6 lbs)

Light Source

3 x LED

Maximum Speed

2500 m/min (8200 ft/min) (dependent on fault length)



Number of Axes


Object Size

Min. 0.4 mm (0.0018 inch)
Max. 25 mm (0.98 inch)

Power Requirement

15 ~ 25 Vdc, 20 Watts max (with AiG2-LN display)



Relay Outputs

3 x
Volt-Free Contact; Max. Voltage 50 Vdc 0.5 A
Gauge OK, Lump, Neck

Signal Processing Rate

200 kHz

Speed Input

Analogue: 0 - 10 Vdc scalable.
Pulse: Max. frequency 250 kHz. Max pulse height 30 V. Scalable for exact speed.

Time Between Faults

Min. User defined in the range 0.02 to 99 ms

Tolerance Setting Range

0.04 to 10 mm (0.001 increments)

Tolerance Setting Resolution


Recently Updated Products

Fake Note Detecting Machine
Fake Note Detecting Machine
Supplier    :    Standard Electronic System
Inquire Now
Industrial Grade Dust Detector
Industrial Grade Dust Detector
Supplier    :    Eip Enviro Level Controls Pvt Ltd
Inquire Now
Fake Currency Detector Machine
Fake Currency Detector Machine
Supplier    :    Aditya Systems
Inquire Now
Digital Type Hydrogen Detector
Digital Type Hydrogen Detector
Supplier    :    Gasvigil Technologies Pvt. Ltd.
Inquire Now
Industrial Grade Mass Detector
Industrial Grade Mass Detector
Supplier    :    Waters (India) Pvt. Ltd.
Inquire Now