Product Profile of Waterproof Type Cable Repair Sleeve

Waterproof Type Cable Repair Sleeve is an adhesive lined, wraparound heat shrink that can be easily applied without the need for disconnection and provides good environmental sealing, rugged mechanical protection and high performance electrical insulation. The Sleeve provides permanent waterproof barrier and environmental seal and is chemical, copper corrosion and fungus resistant. The Sleeve has the feature that shut down of system is not required for repair ad hot melt adhesive provides good environmental sealing and insulation. The Sleeve has significant protection advantages over insulating tape and can be cut to size in field to suit application. The Sleeve can be availed in optional medium and heavy wall versions. The Sleeve has volume resistance of 10 ohm/ cm, dielectric constant of maximum 3, dielectric strength of greater than 15 KV/ mm, operating temperature from -55 ° C to 125 ° C, longitudinal change of maximum - 10%, specific gravity of 1.4, low temperature flexibility at -55 ° C, elongation of 300% minimum, tensile strength of minimum 12 n/ mm2. The Waterproof Type Cable Repair Sleeve has outer dimension from 5 to 122 mm, length from 100 to 400 mm, overlap length of less than or equal to 25 mm.

Application of Waterproof Type Cable Repair Sleeve:

• Repair of damaged cable jacket

• Retrofit protection of connections.

• Connectorized cable repair.

• Used in confined spaces underground and ideal for protections of defrayed cable / connectors.

• Cable/ conduit transitions.

• Cable/ wire / rope bundles.

• Used in communication, electrical, utility, industrial, shipboard, offshore, marine, wire and cable industries.




Key Features of Waterproof Type Cable Repair Sleeve

• It is an adhesive lined, wraparound heat shrink that can be easily applied without the need for disconnection and provides good environmental sealing, rugged mechanical protection and high performance electrical insulation.
• Provides permanent waterproof barrier and environmental seal and is chemical, copper corrosion and fungus resistant.
• Shut down of system is not required for repair ad hot melt adhesive provides good environmental sealing and insulation.
• Significant protection advantages over insulating tape and can be cut to size in field to suit application.
• Can be availed in optional medium and heavy wall versions.
• Volume resistance of 10 ohm/ cm
• Dielectric constant of maximum 3
• Dielectric strength of greater than 15 KV/ mm
• Operating temperature from -55 ° c to 125 ° C
• Longitudinal change of maximum - 10%
• Specific gravity of 1.4
• Low temperature flexibility at -55 ° C
• Elongation of 300% minimum
• Tensile strength of minimum 12 n/ mm2.
• Outer dimension from 5 to 122 mm
• Length from 100 to 400 mm
• Overlap length of less than or equal to 25 mm