Product Profile of CAN Bus Extenders with Termination Resistor
CAN Bus Extenders with Termination Resistor expand the usable applications for DeviceNet, J1939, SDS, and other CAN V2.0, Part A and Part B compatible CAN bus systems. These CAN Bus Extenders enable the creation of star, tree and other non-linear network topologies which increase flexibility in system design. These CAN Bus Extenders operate at 9.6K to 1M fixed baud for J1939 or CAN networks. CAN Bus Extenders with Termination Resistor auto-detect baud rate on DeviceNet.
Key Features of CAN Bus Extenders with Termination Resistor
- Expands the usable applications for DeviceNet, J1939, SDS, and other CAN V2.0, Part A and Part B compatible CAN bus systems
- Enables the creation of star, tree and other non-linear network topologies which increases flexibility in system design and reduces installation costs
- Works with both trunk lines and drop lines
- Allows operation at higher speeds for specific distances
- Operates at 9.6K to 1M fixed baud for J1939 or CAN networks
- Auto-detects baud rate on DeviceNet (125k, 250k, or 500k baud)
- Isolates the two sections of the CAN bus (copper wire)
- Extender operation is transparent to Master and Slave devices
- Powered from the CAN bus network
- Pluggable 5-pin DeviceNet connections (WRC-CANX-DIN-DN)
- Sealed NEMA-4X enclosure (WRC-CANX-NEM-DN)
- Standard round, mini-style connector with male pins for copper cable (WRC-CANX-NEM-DN)
- Standard CAN chips manage CAN bus error detection and handle message bus arbitration
- Termination resistor built in on the CAN bus interfaces
