Product Profile of Two / Four Wire Temperature Transmitter
Analogik Electronics Corporation offers Two / Four Wire Temperature Transmitter. Analogik Electronics Corporation supplies electronic systems & process control instrumentation. Two / Four Wire Temperature Transmitter accepts Pt -100 input & thermocouples & gives 4 to 20mA output proportional and linear to input signal. Two / Four Wire Temperature Transmitter is available with the features of rack mounted, G - rail, field mounting as well as pipe mounting versions. The flame proof version with CMRS certification for II A, B, C & E are available. In the head mounted 2W temp transmitter the sensor is attached at the bottom. It is used to avoid the signal loss & to avoid the expensive cables of the sensors the 2W - 4W transmitters is the best solution. This is used as isolation between field operations & central room is large.
Key Features of Two / Four Wire Temperature Transmitter
- Three wire lead resistance compensation & built - in cold junction compensation
- High accuracy typically 0.2% of F.S.
- Drift free performance.
- Rack mounted, field mounted, head mounted, 2" pipe mounted, G rail versions available.
- On - line calibration in case of flame proof version.
- Operating temp.: 10 to 55 degree C
- Operating humidity: 90 % Rh. N. C. max.
- Measuring current: Less than 1 mA
Product Specification of Two / Four Wire Temperature Transmitter
- Accuracy:0.25% of F. S.including linearity, repeatebility
- High & Low Currents Enclosure:Min: 3.5mA, Max: 30mA
- Input:Pt-100, RTD, mV, T/C
- Measuring Current:< 1
- Operating Humidity:90 % Rh. N. C. max
- Operating Temperature:10 - 55
- Output:4-20mA
- Output Load:600V at 24 DC supply
- Range:-200 to + 600 for Pt-100, 110 VAC,) 10% 50hz
- Resistance Compensation:Pt-100, RTD, mV, T/C
- Supply:12 - 42
- Temperature Drift:0.02 % °C at both end
- Three Wire Lead:100
- Zero Span Adjustability:15 of F. S.
