Analogik electronics corporation provides analogue signal isolating converters [anasic] that are designed to provide isolation between input signal and output signal and elimination the ground hop problems and increases cmrr. These instruments accept inputs like pt-100, j, k thermocouples, 0/4 to 2c ma or 0 to 1 v and 0 tc 10 v, and give outputs like 0-20 ma or 4 to 20ma or 0 to 10v dc. Also inputs like frequency, ac volt and currents, pulse width, mvs from load cell are processed and give output in terms of dc current or voltage. The converters are available in 1,2,4,8, 16 channels and with power supply of 230 vac, 110v ac or 24v dc or 12v dc. Some of the salient features are high accuracy [0.1 per cent fs] and linearity, low temperature drift [0.02 per cent/dc], high response time 100-200 ms, isolation 1.5 kv/60 sec with zero and span user accessible trimpots on front facia.
