Autonics corporation offers the ct/cts/cty series of counters and timers from its wide range. These are available with maximum counting speed of 10 kcps. Either counter or timer mode can be selected. Cts series is with 48 x 48 x 90 mm, where as the ct series is with 72 x 72 x 85 mm. Cty series is with 72 x 36 x 83 mm. Whil 4-and 6-digit types are available in the cts series, ct and cty series are in 6-digit type. The following operations are possible: count down, count up and count down. Pre-scaling function is possible in this series. Batch reset is possible in ct6 and ct6-2p models. 110-240 v ac and 24-60 v dc power supply can be applied. Single preset type as well as double preset is available in these series. The relay output is having a capacity of 250 v ac/3 a maximum. Apart from the relay output, solid-state output also is available either npn open collector with 30 v dc and 100 ma capacity. The unit will power the external sensor with a regulated 12 v dc power. The input is selecatable as either npn or pnp. Input from proximity switches, photo switches, rotary encoders, fibre optic sensors, micro switches and limit switches can be connected. Excellent memory retention of 10 years is there in these counters. So the data will be retained even after a power reset. Batch counter function for is used in batch process. All these series are ce and ul approved.
