Woodmaster is developed for producing a wide range of modular furniture products such as kitchen counter tops, cabinets, doors, worktops, front panels tops for tables, desks drawers units and wardrobes shelves and side panels. It is easy to set up and operate and can be easily adjusted for different profiles and sizes. The minimum and maximum thickness can vary from 12-110 mm. Maximum length can be up to 2500 mm. Minimum pressure required is 7 bar, drive motor is of 1hp and a heating element of 3 kw. The work piece is held by pneumatic pressure. Glue is applied to the work piece and laminated either manually or with the help of a spray gun. After applying the glue and holding the work piece at proper place the forming bar of the machine with seven pneumatic cylinders and an electric heater produce the required heat with which the laminate sheets are heated, so that they become flexible and then bent around to form a profiled work piece at required pressure. The movement insures proper bond of laminate with the work piece. The movement time can be easily adjusted according for the different laminates, provision for in between stop for bullnose and quarter round profiled work pieces and time of stop can be adjusted according
