Product Profile of Open Frame DC-DC Module Converter
Silicon Technologies offers Open Frame DC-DC Module Converter. Silicon Technologies has achieved ISO 9001:2000 certifications. Open Frame DC-DC Module Converter feature units up to 100 watts in a 56 X 48 X 13mm package. Open Frame DC-DC Module Converter is suitable for telecom, industrial & test equipment applications. The units are PC mountable and require an input filter for low reflected ripple. It also includes continuous short circuit protection, up to 1600VDC input/output isolation and typical efficiencies of > 80%.
Key Features of Open Frame DC-DC Module Converter
- Up to 100 watts output power
- Low profile 56 x 48 x 13mm
- Input voltage ranges to cover most applications
- Over current protection, auto recovery
- High efficiency up to 95%
- Within FCC class A limits
- Manufactured in iso9001 certified facility
Product Specification of Open Frame DC-DC Module Converter
- Dimensions:56 x 48 x 13mm
- Efficiency:above 85%
- Input Filter:Pi network
- Input Voltage:18-36
- Line Regulation:LL to HL at full load. ±1%
- Load Regulation:10% to 100% FL, single output ±1%
- Manufacturing Standard:IEC60950
- Models:SDOF1A, SDOF1B, SDOF1C, SDOF1D, SDOF1E, SDOF1F, SDOF1G, SDOF1H, SDOF1I, SDOF1J
- Operating Humidity:5% - 95% RH
- Operating Temperature:-25 ~ +85
- Output Current:30 Max.
- Output Power:100 Max.
- Protection:Short circuit protection
- Ripple and Noise:20MHz bandwidth and single 50mV p-p dual 75mV p-p
- Shock:MIL-STD-810D
- Storage Temperature:-55 ~ +105
- Temperature Coefficient:±0.02%
- Vibration:10~55Hz, 2G, 30 minutes along X,Y and Z
- Weight:40 gms.
- Key Features:1. Up To 100 Watts Output Power.
2. Low Profile 56 x 48 x 13mm.
3. Input Voltage Ranges to Cover Most Applications.
4. Over Current Protection, Auto Recovery
- Other Features:1. High efficiency up to 95%.
2. Within FCC Class A Limits.
3. Manufactured in ISO9001 Certified Facility
