Product Profile of Fixed Bracket Type In-Line & Staggered Idler
Fixed Bracket Type In-Line & Staggered Idler is available with roll diameters from 76.1 mm to 219.1 mm. Macmet India Limited is the manufacturer of Fixed Bracket Type In-Line & Staggered Idler. Macmet India Limited is an ISO 9001:2008 rewarded company. Macmet India Limited manufactures various types of intake screening equipment, material systems, tube cleaning systems, tube debris filters, polyurethane coatings, lightning protection systems etc. Fixed Bracket Type In-Line & Staggered Idler drops in slot types. Slotted holes will be provided at the base of the idlers bracket to permit adjustment up to 5 mm on each side of the true center for training of the belt.
Fixed Bracket Type In-Line & Staggered Idler has the following features:
- Available with roll diameters from 76.1 mm to 219.1 mm.
- All fixed bracket idlers will be drop in slot type. Slotted holes will be provided at the base of the idlers bracket to permit adjustment up to 5 mm on each side of the true center for training of the belt.
- All idlers conform strictly to IS: 8598.
- The idlers are provided with sufficient quantity of servo grade grease and sealed for life. Special type bearing housing are made out of deep drawn quality steel sheets, idler rollers are made with ERW black tubes conforming to IS: 9295.
- The out of roundness of the rollers will be within +/- 0.5mm.
- Tubes are cut into required lengths and both ends are bored to required accuracy and to achieve concentricity
.
- The bearing housings are made out of deep drawn quality steel sheets