Key Features of Programmable Interface Micro Controller Programmer

• This versatile programmer is a dedicated PIC Micro controller Programmer. All the PIC series of IC`s except the 17 series can be programmed with this Hardware through RS232 Port of PC.
• This programmer also supports ICSP programming for on board programming of supported flash PIC devices.
• MPLAB IDE, PIC CCS C compiler Demo software with MPLAB Plug-in, and programming instructions are provided in CD-ROM.
• The programmer software is compatible to Windows 98, Windows 2000, and Windows XP platforms.
• A Soft copy of the user manual is also included in the CD, in addition to the hard copy provided with the Kit.
• This Dedicated programmer is for programming a wide range of PIC Micro controllers including EEPROMS, PIC12 series, PIC16 series & PIC18 series of IC`s.
• DC Power supply
• RS232 cable
• Software CD
• User Manual
• Specifications:
• Auto detection of programmer by software
• Regulated Power supply 5,13.5V
• One Year Free firmware upgrades for new PIC Devices
• Auto Flash upgrades through serial port
• 16 MHz crystal Oscillator
• Built in RS232 connector
• ZIF socket for easy programming
• External ICSP Interface for on board programming
• Device ID check, Pin Continuity check.
• Programmable configuration and ID
• Selective Erase and programming for supported PIC Devices
• Manual / Auto Reset
• Configurable COM Port.
• Program, Read, Verify and Blank check Modes
• Hex Code Editor
• Program & Verify fly Window
• Switchable to MPLAB software
• Extensive Integrated Help
• Debug vector Read & write
• Oscal value read & program [for selected chips]