Rapid flow india provides hydraulic die-casting machines . These die-casting machines are provided with standard accessories, like sleeves, bushes, spacers for centre feeding, keys for tie rod nuts, maintenance tool kits and installation & maintenance manual. These die-casting machines are built with a very unique design. Working of this die-casting machine is given by: they have got piston type accumulators with rare recharging of nitrogen and negligible breakdowns on account of gas charging compared to bladder type accumulator used by other pressure die-casting machine manufacturers [claims the company]. The machines are constructed on low working pressure with larger piston areas which improves the tonnage capacity and reduces the strain and ultimately enhances the life of seals, pipelines and joints, therefore the chances of leakage of oil is minimised. All pistons rods, tie rods are duly ground and hard chrome plated and are made with larger diameter to provide the robustness to the machines. To avoid deformations during machining at manufacturing end and under usage at customers end, these castings of platens are duly seasoned before machining. Alignment of the injection cylinder is maintained within 0.2 mm for enhanced sleeve and plunger life which ultimately provides higher profits. Robust bell housing is provided between the motor and the tandem pump which provides the best alignment at the coupling for maintenance-free running of motor and pump.
