Key Features of Automatic Welt Pocket Unit with Programmable Control Facility

• Freely programmable control with a memory of 40 seams.
• Pocket length from 20 to 200 mm, optional up to 240 mm.
• Needle gauge from 8 mm to 30 mm in steps of 2 mm available.
• Stitch length, sewing speed and transfer speed can be programmed individually.
• Each pocket seam can be programmable with true back tack or condensed stitches.
• Automatic flap sensing by photocell.
• Five separate programmable laser beam marking lights for precise and easy loading.
• Two - needle double lockstitch sewing head, can be titled for service.
• Thread trimming device.
• Microprocessor control with LCD display and memory chip for data backup.
• Main clamp drive via regulated step motor with automatic length control from 20 to 200 mm [optional 240 mm].
• Corner cutting through step motor.
• Corner cutting adjustment by up to 10 mm in increments of 0.1 mm.
• Lateral corner knife adjustment through excenter.
• Corner knife holder with adjustable cutting width.
• Lowering sequence of the transfer clamp programmable.
• Each seam start and end can be programmable with back tack or condensed stitches.
• Double piping attachment.
• Clamp back feed inhibitor.
• Needle thread monitor.
• Bobbin rest thread sensor.
• Needle gauge: 8 to 30 mm in increments of 2 mm.