Product Profile of Primer Surfacer Zinc Phosphate
Tuff Coat Polymers Pvt. Ltd. Offers Primer Surfacer Zinc Phosphate. Tuff Coat Polymers Pvt. Ltd. Is an ISO 9001:2008 accredited company. The company manufactures Quality Industrial Paint. The company manufactures products like all type of Synthetic Enamels and Primers, All type of Quick drying paints and primers, Epoxy paints and primers, Polyurethane paints and primers, Chlorinated Rubber paints, Stoving Enamels. The Primer Surfacer Zinc Phosphate is based on synthetic alkyd resin suitably modified with acrylic monomers and plasticizer. It contains Zinc Phosphate as anticorrosive pigment. It offers good corrosion resistance, dries faster. Any type of Top Coat can be applied over this primer coat. This primer is available in different shades like red oxide, Grey, White and off White.
The key properties of Primer Surfacer Zinc Phosphate are as follows:
- It can be used as undercoat for many types of paints
- Faster drying than other synthetic primers so immediate over-coating
- Resists most salts and alkalis and mild acids
- Resist to splash of aromatic and aliphatic solvents. [Immersion is not recommended]
- Excellent Water and Oil/ Grease Resistance
- It is single component primer as a under coat for Polyurethane Paint with lower D.F.T.
Product Specification of Primer Surfacer Zinc Phosphate
- Application Viscosity:20 to 25 Seconds by Ford Cup B4 at 30°C
- Composition:Especially syn modified alkyd, plasticizer, & corrosion inhibiting pigments, suitable solvents like aromatic, ethers, & alcohol & ketones
- Cross Cut Adhesion Test:Passes as per IS -101
- Density:1.2±0.05 at 30°C by gm/cc Cup
- DFT single coat:Minimum 15-25
- Drying Time:Surface Dry: 2 Minutes maximum
Tack Free: 15 Minutes maximum
Hard Dry: 3 Hours maximum
Full Curing: 48 Hours maximum
- Fineness of Grinding:Minimum 5 HG by Hegman Gauge
- Finish:Smooth & Matt to Eggshell
- Flash Point:Bellow 30°C
- Heat Resistance:100°C of Dry heat
- Over Coat Interval:Minimum 30 minutes.
- Packing & Packaging:4 Liter tins packing
- Recommended DFT:20m
- Recommended Thinner:AcroThinner102 / PU Thinner
- Scratch Hardness:Minimum 1200 Gms
- Shelf Life:1year minimum
- Spreading Capacity:12 - 14 Sq Meter/ Liter
- Supply Viscosity:20 to 25 Seconds by Ford Cup B4 at 30°C
- Water Resistance Test:72 Hours Passes as per IS -101