Product Profile of Digital SCR Thyrister Power Controllers Device
Jeltron Systems [I] Pvt. Ltd manufacture Digital SCR Thyrister Power Controllers Device. Jeltron Systems [I] Pvt. Ltd is IS0 9001 certified company. Digital SCR Thyrister Power Controllers Device is used by major industries in cement, Paper, Power, Textile and other industries.
Key Features of Digital SCR Thyrister Power Controllers Device
- These New digital SCR Power Controllers are available with a variety of pre - engineered options ideally suited for broad range of applications.
- P-D Series SCR Power Controllers are phase angle controlled units and it provides smooth proportional output power from 0 to 98% in response to the low-level input control signals.
- These units are ideally suited for all Resistive, capacitive and Inductive loads with a variety of pre-engineered options.
- Z-D Series SCR power controller features internal cycle control to provide 0 to 100% proportional control of output power in response to the low level input control signals.
- Single/Three phase power packs using integral cycle control, which eliminates EMI/RFI.
- Integral cycle control can be used for resistive loads only.
- Model 34Z1-D units features two-leg control. This method proportionally applies power to three phase loads by gating the inverse/parallel SCRs in two legs of a three-phase system. This provides an economical way for controlling three wire `Y` or `D` type loads with performance comparable to three leg units.
- Fully Digital & RISC Micro controller based design.
- Adjustable Soft Start Time, set limit, PLF adjustment, Current limit and Current trip.
- Phase Angle control, integral cycle control or combination of both can be selected.
- 2 line, 20 character LCD display.
- 6 feather touch keys in keypad.
- Display of O/P voltages and current.
- Display of trip information.
- LED indication for power ON, Thyrister ON & trip.
- Inbuilt protection for Signal Phasing, Phase reversal, Electronic Thermal Over load & Instantaneous over current.
- Alarms for single phasing, Thyrister short circuit, over & under voltage, Partial load failure, load unbalance & short circuit of output terminals.
- Heater control.
- Electrically heated Industrial Furnaces for Heat treatment [Such as Hardening, tempering, Annealing, Sintering, Braging, Melting Etc.].
- Transformer Control.
- DC Power control & Power Supplies.