Pune-based sparkonix [india] pvt ltd manufactures edm machines - sn 15 are manufactured by pune-based sparkonix [india] pvt ltd . These edm machines that are best suited suitable for processing inserts, single cavity moulds and dies. Some special features are provided by these edm machines, which include: these machines provide uniform and good surface finish and has built-in anti arc. The rhomboid quill of these are hardened and ground. Ground lead screws are provided with pre-loaded needle roller bearings are provided for slides. Time totaliser, auto flush timer, auto pos, multiple-outlet flushing system are some of the important features of these machines. These edm machines are table-mounted machines with precision coordinate movement for the worktable. Physical configurations of these edm machines: total space required for a machine is 2 x 2 square metres. Double door system facilitates easy setting and job checking/inspection. The size of the tank is 500 mm x 300 mm x 200 mm. These machines with table of size 300 mm x 200 mm have long/cross travel of 150 mm x 100 mm. Quill travel is 150 mm and the maximum working current is 15 amps. Mrr of graphite to steel is 90 cu mm/min and that of copper to steel is 70 cu mm/min. The dimension of the packing case is 1.8 x 1.5 x 2.4 cu metres maximum weight of the mechanical part is 600 kg approximately and the weight of the controller is approximately 100 kg. The dimension of the packing case is 1.8 x 1.5 x 2.4 cu metres
