Presto Stantest Private Limited manufactures Digital Tensile Strength Tester based on Constant Rate of Traverse principle. Presto Stantest Private Limited is an ISO 9001: 2000 certified company. The Digital Tensile Strength Tester based on Constant Rate of Traverse principle is suitable for applications of plastic, rubber and metal. The sample to be tested is held between two jaws, the upper one is a stationary jaw while the other end is made to move at a known fixed speed with the help of Motor, Gear Box and Lead Screw arrangement [75mm or 300mm per minute]. The load exerted on the stationary jaw is sensed by a sensor connected with load cell which directly indicates the load in digital form in kg. The elongation of the machine is digitally displayed and minimum jaw separation is 25 mm, while the maximum jaw separation is 750 mm. Digital Tensile Strength Tester complies with the BS 1610, BSES 1002-3, ASTM E-4 and DIN 5122/1.
Some of the other key specifications of Digital Tensile Strength Tester based on the Constant Rate of Traverse principle are as follows:
