Product Profile of Digital Temperature Indicator Cum Controller
Digital Temperature Indicator cum Controller is featured with 3½ digit 12mm seven segment red LED display to facilitate ease of operation. The Digital Temperature Indicator is capable of functioning under a temperature range varying from 0 Degree C to 60 Degree C. The Digital Temperature Controller consumes maximum 5 V AC at 240 V AC power during operation. Digital Temperature Indicator cum Controller allows the set point to be adjusted by potentiometer throughout the range and the maximum point value is 2.
Anadig Systems is the manufacturer of Digital Temperature Indicator cum Controller. Anadig Systems is the supplier of process control instruments like circular chart recorder, RTD temperature sensors, thermocouples and thermo wells, junction boxes, loop power indicator, PID temperature controller, alarm annunciator, table top calibrator, digital temperature indicator cum controller, PC based data acquisition and control systems. Anadig Systems is an ISO 9001-2000 registered company.
Key Features of Digital Temperature Indicator Cum Controller
- Featured with 3½ digit 12mm seven segment red LED display
- Ease of operation
- Capable of functioning under a temperature range varying from 0 Degree C to 60 Degree C
- Consumes maximum 5 V AC at 240 V AC power during operation
- Allows the set point to be adjusted by potentiometer throughout the range and the maximum point value is 2
Product Specification of Digital Temperature Indicator Cum Controller
- Accuracy:0.75% FSD 1 Digit for specified range as given above for R Type Thermocouple Accuracy will be +/- 1% FSD +/- Digit. While ordering specific operating range of temperature for J, K, T, E, R, RTD, a narrow calibration span will ensure better accuracy of the order of 15 %, in the operating range. For 4 to 20 mA Input Accuracy - 0.2% FSD 1 Digit
- Ambient Temperature:0 to 60 °C
- Display:3 1/2 Digit 12 mm Seven Segment LED Display, RED. Optional GREEN/ ORANGE
- Enclosure:Enclosure Size : A - 96 x 96x 150 mm (Size), 92 x 92 (Cutout); B - 77 x 144 x 160 mm (Size), 68 x 138 (Cutout)
- Humidity:90% RH
- Input:Sensor/ Input : Any one of the following inputs can be offered, (confirm type of Input and Range while ordering), Optional Input : 4 - 20mA - (°C, Kg/cm, RPM, PH, %, Bar, etc.)
- Models:i) MS-D - Digital Temperature Indicator, ii) MS-D 1 - Digital Temperature Indicating Controller with 1 Set Point, iii) MS-D 2 - Digital Temperature Indicating Controller with 2 Set Point.
- Mounting:Flush Panel Mounting (Flame Proof/ Weather Proof field Mounting Enclosures on request)
- Power Consumption:5 VAC maximum at 240 VAC
- Range:0 - 400 °C, 0 - 1000 °C, 0 - 1200 °C, 0 - 1700 °C, -50 to 300 °C
- Resolution:0.1 upto -200 °C to +200 °C, 1 above 200 °C
- Sensor Type:Input Sensor Type : J, K, T, R, PT 100 Unit
- Set Points:Adjustable by Potentiometer throughout the range, Maximum 2 Set Points. Additional Set Points on request.
- Supply Voltage:110 VAC/ 240 VAC 10% 50 Hz, (DC Voltage or 24 VAC on request)
