www.jimtrade.com
Menu

Microprocessor Based Cp Controller

Image Not Available

Product Category :    Industrial Process Controllers

Supplier                :    Raskin Oxygen Probe Systems

Key Features of Microprocessor Based Cp Controller

  • Indication: 0-1.5% C, 0-100 Deg. C, 0-1999 mV & 0-9999K ohms, digital.
  • Input: 2mV inputs - one from oxygen probe and the 2nd from thermocouple. Based on these inputs, signals are processed and % C calculations made.
  • Supply: 110/230V +/- 5%, 50 Hz stabilized spikes free, with proper earthing.


Inquire Now
Product Profile of Microprocessor Based Cp Controller

Raskin Oxygen Probe Systems manufactures Microprocessor Based CP Controller. Raskin Oxygen Probe Systems offers various types of industrial furnaces. The Microprocessor Based CP Controller is used to locate this instrument in a dust free ventilated environment. The power supply should be made from a CVT/spikes buster.

Key Features of Microprocessor Based Cp Controller
  • Indication: 0-1.5% C, 0-100 Deg. C, 0-1999 mV & 0-9999K ohms, digital.
  • Input: 2mV inputs - one from oxygen probe and the 2nd from thermocouple. Based on these inputs, signals are processed and % C calculations made.
  • Supply: 110/230V +/- 5%, 50 Hz stabilized spikes free, with proper earthing.
  • Control action: 3 thumb wheel set points range 0-1.5% C/0-1999 mV, time proportional control action through action and pause timers.
  • Output: Through solid state, zero cross over pulsed output either 0 or 230 V [110V] on/off, for resistive load up to 20W [solenoid valve / auxiliary contactor]
  • Alarms: Probe temperature outside operating range and high impedance alarm. Also fixed pre set temperature alarm normally set at 850 Deg C. Solid state pulsed output.
  • Control mode: Either in % C or O2 mV units, through selector switch.
  • Current output: 4-20mA DC linear isolated corresponding to
  • 0-1.5%C/1000-1200mV into a load of up to 400 ohms
  • Dimensions: 288 W X 144H X 400D mm with panel cutout 282X138mm
Product Specification of Microprocessor Based Cp Controller
  • Control Action:3 thumb wheel set points range 0-1.5% C/0-1999 mV, time proportional control action through action and pause timers.
  • Control Mode:Either in % C or O2 mV units, through selector switch.
  • Current Output:4-20mA DC linear isolated corresponding to 0-1.5%C/1000-1200mV into a load of upto 400 ohms
  • Dimensions:288 W x 144H x 400D mm with panel cutout 282 x 138mm
  • Indications:0-1.5% C, 0-100 Deg. C, 0-1999 mV & 0-9999K ohms, digital.
  • Supply:110/230V ± 5%, 50 Hz stabilised spikes free, with proper earthing.
Recently Updated Products



Single Phase Industrial Automation System
Single Phase Industrial Automation System
Supplier    :    Vast Systems
Inquire Now
MPPT Charge Controller with LCD Display
MPPT Charge Controller with LCD Display
Supplier    :    Softgrip Power Solutions Llp
Inquire Now
Industrial Grade ET Controller
Industrial Grade ET Controller
Supplier    :    Microverse Automation Private Limited
Inquire Now
Underground Swing Gate Automation
Underground Swing Gate Automation
Supplier    :    Smart Sense Automation
Inquire Now
5-Channels Programmable Logic Controller
5-Channels Programmable Logic Controller
Supplier    :    Zeal Automation
Inquire Now